FDP Forum / Deluxe Reverb owners, / 4 messages in thread.

1 to 4 of 4 shown.


77 Hot Rod



Belgium

Oct 10th, 2017 04:16 AM        

Can someone give me the correct distance between the two side panels in cm? I would like to know if the chassis of a deluxe reverb fits in a Prosonic cabinet. From the measurements I find online it's a close one and I wanna be shure.<br /> <br /> Thx



77 Hot Rod



Belgium

Oct 10th, 2017 04:41 AM        

Chassis Cut-Out from my Prosonic cab is 56.8 cm.<br /> That's about 22 1/3 inch.<br /> Would the chassis of a Deluxe Reberb fit?<br /> Thanks.



Peegoo

Contributing Member
**********
**********
******

Enjoying

the downtime
Oct 10th, 2017 05:33 AM        

Sounds like it will fit. The length of a Fender DR chassis is 22 3/8" long.<br /> <br /> All aftermarket DR chasses measure 570mm long, 45mm high, and 180mm deep. 570mm converts to about 22 7/16" which is right in the ball park.<br /> <br /> The dimensions vary slightly on all Fender amps due to different thicknesses of Tolex and tweed fabric. When amp cabinets are built, extra space must be added to account for the thickness of the Tolex/tweed covering that folds around the wood and into the chassis opening.



77 Hot Rod



Belgium

Oct 12th, 2017 08:23 AM        

I looked again and the distance between the sides on the Prosonic is 56,7 cm so if the DR chassis is 57 then it will not fit. Close but no sigar :-(<br /> Thx peegoo



Copyright 1999-2003 Fender Discussion Page, LLC. Visit the web site at http://www.fenderforum.com