FDP Home Page / FDP Forum / FAQ's

The FDP is made possible by the following companies and individual members like you.
Please use the links below to show them we value their sponsorship.

Jensen Loudspeakers

Yellowjackets Tube Converters

Sweetwater

Antique Electronics Supply

MOD KITS DIY

WD Music

Amplified Parts

Apex Tube Matching


* God bless America and our men and women in uniform *

* Illegitimi non carborundum! *

If you benefit and learn from the FDP and enjoy our site, please help support us and become a Contributing Member or make a Donation today! The FDP counts on YOU to help keep the site going with an annual contribution. It's quick and easy with PayPal. Please do it TODAY!

Chris Greene, Host & Founder

LOST YOUR PASSWORD?

......................................................................

   
FDP Jam
Calendar
Find musicians
in your area!
  Search the Forums  

FDP Forum / The 'Pup' Tent / Push pull split coil pups

Tony F

Long Island, NY

When you come to fork in road take it
Dec 31st, 2018 02:32 PM   Edit   Profile  

I have a fender player series tele HH with split coil push pull pot. Curious as to the pot value when the rule is 500k for buckers and 250 for single coil. So what pot do they use to work with both in a set up like this?
thanks
t

(This message was last edited by Tony F at 04:33 PM, Dec 31st, 2018)

Leftee
Contributing Member
**********
**********
**********
**********

VA

Dec 31st, 2018 04:37 PM   Edit   Profile  

500k is good. You can always roll back the tone a little in SC mode.

Peegoo
Contributing Member
**********
**********
**********
**

Head fulla lightning

and a hat fulla rain
Dec 31st, 2018 04:51 PM   Edit   Profile  

That will work, but if you really want to know what's best, try it both ways. Your ears and the amp you play through also are part of how the pickup will sound with different pots.

The reason is some humbuckers need a 500K pot and some don't because they're an inherently bright pickup.

One of the pots will work better and sound better to you than the other one.


Cal-Woody

USA/California

Why do I keep fixing things that work?
Dec 31st, 2018 05:13 PM   Edit   Profile  

I know somewhere I saw a push-pull pot that when engaged (down position) it was 500k ohm and when pulled, it became a 250k pot. I just can't remember where it was. But regardless, wouldn't that be ideal for this kind of a setup? That would address both positions equally well and have the proper ohmage for both settings.
Do a Google search and you may find it.
I'm not sure if it was Dimarzio or Amplified Parts but it came up on a search that I did a while back.
And if such a part would be available, would you use the proper ohm capacitors on each leg of the hot lead going to the pickup selector and when engaged in each mode the pickups would have the proper resistance? Just a thought but would be cool if for this very same kind of issue that I see often here.
Is my thinking on this correct?
Thanks, Woody

Te 52

Laws of Physics

strictly enforced
Dec 31st, 2018 06:26 PM   Edit   Profile  

There really is no rule, it just depends on what sounds best to you. Some people split the difference by using a 400K. A little harder to find, but available.

I would be inclined to start with a 250K and change to 500K or 400K if the tone was too muddy in full humbucker mode.

If none of those solutions satisfy, another option would be to start with a 500K DPDT push-pull volume pot, then employ the second pole on the DPDT to switch in a 500K fixed resistor in parallel with the volume pot when coil split is engaged. That way you have a 500K in humbucker mode and a 250K with slightly altered taper in coil split mode.

But I would try one of the simpler options first. All the above assumes that your switching is like the American Tele HH, where both coils are split at once, no positions with mixed split and full humbucker.

pcalu

usa Thumb area Mi

Dec 31st, 2018 09:09 PM   Edit   Profile  

Definitely, there is no rule on what to use.

250k or 500K... both can be fine-tuned with the cap value.

Being a single coil guy I prefer the 250k though.

I have in my possession (that I sue a lot) one of those Fender USA "Professional" Telecasters HS with the split humbucker in the bridge. 500k pots

It has a great humbucker that when actually split it sounds like an actual telecaster bridge pup w/ twang and all. Adjustable pole pieces great pickup.



FDP Forum / The 'Pup' Tent / Push pull split coil pups




Reply to this Topic
Display my email address             Lost your password?
Your Message:
Link Address (URL):
Link Title:




Moderators: Chris Greene  Iron Man  reverendrob  

FDP, LLC Privacy Policy: Your real name, username, and email
are held in confidence and not disclosed to any third parties, sold, or
used for anything other than FDP Forum registration unless you specifically authorize disclosure.

Furtkamp.com 
Internet Application Development

Copyright © 1999-2019 Fender Discussion Page, LLC   All Rights Reserved