FDP Home Page / FDP Forum / FAQ's

The FDP is made possible by the following companies and individual members like you.
Please use the links below to show them we value their sponsorship.

Amplified Parts

WD Music

Musician's Friend

Guitar Center

Jensen Loudspeakers

MOD KITS DIY

Antique Electronics Supply

Sweetwater

Yellowjackets Tube Converters

Advertise here

Apex Tube Matching


* God bless America and our men and women in uniform *

* Illegitimi non carborundum! *

If you benefit and learn from the FDP and enjoy our site, please help support us and become a Contributing Member or make a Donation today! The FDP counts on YOU to help keep the site going with an annual contribution. It's quick and easy with PayPal. Please do it TODAY!

Chris Greene, Host & Founder

LOST YOUR PASSWORD?

......................................................................

   
FDP Jam
Calendar
Find musicians
in your area!
  Search the Forums  

FDP Forum / Miscellaneous and Non-Fender Topics / Question about my new Gibson SG Special

Next 20 Messages  
Bubbalou

USA

THE LOW END OF UPPER TEJAS
Nov 28th, 2017 04:35 PM   Edit   Profile  

I like many things about this guitar but one thing I wish it had a smoother backside of the neck. I am not looking for a smooth glossy neck but a little smoother feel . Any suggestions or thoughts welcome

reverendrob
FDP Data Goon
Moderator

We all want

our time in hell
Nov 28th, 2017 04:51 PM   Edit   Profile  

If it's the blowout faded model, buff and polish the ever-loving snot out of the back of the neck!


Hammond101
Contributing Member
**********
*

So. Cal. USA

Nov 28th, 2017 04:53 PM   Edit   Profile  

^^This^^

A little 0000 steel wool first then buff her out.

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Nov 28th, 2017 06:01 PM   Edit   Profile  

Thanks guys. It is a 2016 Faded model. Don’t want any snot in my guitar so I will give your ideas a try

Mick Reid
Contributing Member
*****

Australia

American-made in Oz!!
Nov 28th, 2017 11:32 PM   Edit   Profile  

Scotch-Brite pad instead of steel wool.

No fine steel debris to get stuck to your pickups.
I think the gray ones are 0000 equivalent.


Bubbalou

USA

THE LOW END OF UPPER TEJAS
Nov 29th, 2017 06:55 PM   Edit   Profile  

Thanks Mick, good thought

stratcowboy
Contributing Member
**********
**

USA/Taos, NM

Nov 29th, 2017 08:59 PM   Edit   Profile  

Yeah...scotch-brite works great for lots of things. And a lot less messy...

archiestone
Contributing Member
**********
*

El Californio

Nov 30th, 2017 12:15 PM   Edit   Profile  

3M 'Finesse-It' finishing polish can also help reduce friction and give you a slicker surface.

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Nov 30th, 2017 06:41 PM   Edit   Profile  

I used Scotch Brite no scratch pad with Dr. Ducks Axe Wax. UCB better. archiestone, I will definitely try 3M ‘Finesse-It. Thanks

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Dec 1st, 2017 11:52 AM   Edit   Profile  

Found some very good strings recommended by 2 guitarists for the SG. D'Addario NYXL .010-.046
They sound good, feel good,very balanced and quickly come to retain their tuning.

Judging by a D'Addario demo video a guitarist (at the dismay of Mr. D'Addario who told him "your not allowed do that" the guy pulled way up on his vibrato to the point it was very high pitched and it came back to tuned position. Not once but twice. That creeped me out as I expected the string to literally "explode" from the guitar so with that I am going to try a set on an Ibanez with a whammy bar so we'll see, however I will not be using it out of normal parameters.

NYXL Demo

BrentD
Contributing Member
*********

Michigan

Harumph.
Dec 2nd, 2017 04:23 PM   Edit   Profile  

Just play it! It'll shine up. I've owned at least three faded Gibsons, and they all glossed up over time.

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Dec 3rd, 2017 09:04 PM   Edit   Profile  

Thanks BrentD ;)
It wasn't the fact it wasn't glossy but that from the 1st thru the 5th Fret area on the back of the neck was rough feeling. Scotch Brite pad and Dr. Ducks Axe Wax did the trick.

BrentD
Contributing Member
*********

Michigan

Harumph.
Dec 3rd, 2017 09:23 PM   Edit   Profile  

So it felt like it wasn't fully sanded? Glad you got it worked out, I just haven't heard of that before on these.

Peegoo
Contributing Member
**********
**********
******

Roisin, I wanna

fight your father
Dec 4th, 2017 02:48 PM   Edit   Profile  

It's more like an open-pore feel because these are down-market models with reduced finish work: they are not grain-filled, leveled, wet sanded and polished like the super glossy (mo'spensive) models.

They get sanded with 220, stained, and then a few thin coats of clear lacquer--and out the door they go. I've seen orange peel on some of these.

If you've handled one of the Faded Series SGs, LP Juniors, Flying Vs, or Explorers, you'll be familiar with the surface feel.

The cool thing is if you like the slick glossy feel on a guitar, you can remove the hardware, apply several coats of clear nitro, and level and sand it to obtain a mirror-like surface.

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Dec 4th, 2017 04:23 PM   Edit   Profile  

What Peegoo said hits the nail on the head. I wouldn’t know how to spray nitro except using a spray can. Is that viable?

stratluvr
Contributing Member
**********
**

Alcohol- Because No

Good Story Ever Started by Drinking Milk
Dec 4th, 2017 04:47 PM   Edit   Profile  

A spray can is totally doable. I bought a Les Paul Standard Faded about 10 years ago and did just what Mr. Peegoo said. I stripped off the hardware, sprayed several coats of clear, wet sanded it and sprayed some more. It could have came out a little better if I sanded more. The devil is always in the details.

Peegoo
Contributing Member
**********
**********
******

Roisin, I wanna

fight your father
Dec 4th, 2017 05:41 PM   Edit   Profile  

Very cool. The number one rule to always remember about applying a finish on a guitar is this:

1. There are no shortcuts.

This means you have to take your time, be patient, and don't try to speed things forward. Pay attention to the smallest detail because when a finish gets polished the little insignificant issue becomes a large detail.

Work cleanly.

Sand lightly and very carefully, especially over corners, because the sandpaper will burn through the finish to the wood in the blink of an eye.

If you rush the job, you will later regret not taking that extra week or three to do it properly.

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Dec 5th, 2017 10:51 AM   Edit   Profile  

Thanks stratluvr and Peegoo ;)

BrentD
Contributing Member
*********

Michigan

Harumph.
Dec 6th, 2017 08:31 PM   Edit   Profile  

I've had a Faded LP Studio, a Faded DC LP Special, and a Faded LP Junior. All of them smoothed out with play - they did get shinier but I suppose I mis-typed when I wrote, "glossed up." I really meant that they got smoother.

The reason I asked about how it felt is that even the open pores never felt unsanded. They certainly have a texture but never one that feels to me like it had to be hit with any abrasive material.

Bubbalou

USA

THE LOW END OF UPPER TEJAS
Dec 7th, 2017 03:50 PM   Edit   Profile  

No Worries BrentD. It is smoother now :)

Next 20 Messages  

FDP Forum / Miscellaneous and Non-Fender Topics / Question about my new Gibson SG Special




Reply to this Topic
Display my email address             Lost your password?
Your Message:
Link Address (URL):
Link Title:




Moderators: Chris Greene  Iron Man  reverendrob  

FDP, LLC Privacy Policy: Your real name, username, and email
are held in confidence and not disclosed to any third parties, sold, or
used for anything other than FDP Forum registration unless you specifically authorize disclosure.

Furtkamp.com 
Internet Application Development

Copyright © 1999-2018 Fender Discussion Page, LLC   All Rights Reserved