FDP Home Page / FDP Forum / FAQ's

The FDP is made possible by the following companies and individual members like you.
Please use the links below to show them we value their sponsorship.

Guitar Center

Amplified Parts

Jensen Loudspeakers

Yellowjackets Tube Converters

WD Music

Apex Tube Matching


Antique Electronics Supply

Advertise here

Musician's Friend


* God bless America and our men and women in uniform *

* Illegitimi non carborundum! *

If you benefit and learn from the FDP and enjoy our site, please help support us and become a Contributing Member or make a Donation today! The FDP counts on YOU to help keep the site going with an annual contribution. It's quick and easy with PayPal. Please do it TODAY!

Chris Greene, Host & Founder



Find musicians
in your area!
  Search the Forums  

FDP Forum / Guitar Mods, Repairs, and Projects / Danelectro necks

Contributing Member

juneau ak.

If you must smoke, please smoke salmon!
May 4th, 2017 02:09 PM   Edit   Profile  

I recently restrung my Mod 6 to a lighter gauge string, (11's to 10's) doing this produces significant more buzz on the D-G-B strings around the 7th to 14th fret area. This guitar is one of the reissue models made in Korea in the 90's. It has the angled head stock and no truss rod cover plate nor any access under the pick guard for truss rod adjustments so it appears I will be unstringing and removing the neck out of the pocket.

Question, since I'm after a bit more relief do I turn the rod clockwise? and would a 1/4 turn be good start, I realize I'm going to have to do this laborious process more than once to get it dialed in.

Contributing Member

The spotlight

looks like a prison break
May 4th, 2017 02:18 PM   Edit   Profile  

Start with 1/8 to 1/4 turn counterclockwise and try that. It reduces tension on the rod and that allows the neck to pull into relief.

To check for proper neck relief, have the guitar tuned to pitch.

1. Place a capo lightly at the 1st fret.

2. Lightly press a finger to the 17th fret on the low E string.

3. Use a .012" thickness gauge and check the gap between the bottom of the E string and the top of the 8th fret. The .012" gauge should just squeak in there without moving the string.


LA , Calif

I try my best
May 4th, 2017 02:20 PM   Edit   Profile  

Counter clock wise. I've seen some videos doing stock strats with the truss adjust at the body and some just loosen the strings enough to get some of the tension off , remove the neck plate screws and lift the neck just enough to get to the rod adjustment . They don't pull the neck all the way up just enough to access the adjustment. Think I saw it on Fenders site how to videos. Course you may need to hold the peg head down to keep the tension of the strings from pulling the neck up at the peg head.

truss rod adjust

(This message was last edited by catnineblue at 04:56 PM, May 4th, 2017)

FDP Forum / Guitar Mods, Repairs, and Projects / Danelectro necks

Reply to this Topic
Display my email address             Lost your password?
Your Message:
Link Address (URL):
Link Title:

Moderators: Chris Greene  Iron Man  reverendrob  

FDP, LLC Privacy Policy: Your real name, username, and email
are held in confidence and not disclosed to any third parties, sold, or
used for anything other than FDP Forum registration unless you specifically authorize disclosure.

Internet Application Development

Copyright © 1999-2018 Fender Discussion Page, LLC   All Rights Reserved