FDP Home Page / FDP Forum / FAQ's

The FDP is made possible by the following companies and individual members like you.
Please use the links below to show them we value their sponsorship.

Jensen Loudspeakers

Sweetwater

Musician's Friend

Amazon

Antique Electronics Supply

Guitar Center

Apex Tube Matching

WD Music

MOD KITS DIY

Amplified Parts

Yellowjackets Tube Converters


* God bless America and our men and women in uniform *

* Illegitimi non carborundum! *

If you benefit and learn from the FDP and enjoy our site, please help support us and become a Contributing Member or make a Donation today! The FDP counts on YOU to help keep the site going with an annual contribution. It's quick and easy with PayPal. Please do it TODAY!

Chris Greene, Host & Founder

LOST YOUR PASSWORD?

......................................................................

   
FDP Jam
Calendar
Find musicians
in your area!
  Search the Forums  

FDP Forum / I'd Hit It! - Drums and Percussion / DIY drum riser?

professor
Contributing Member
**********
******

North Gnarlyington

Aug 7th, 2013 08:58 PM   Edit   Profile   Print Topic   Search Topic

I made a 7" x 7" out of 2X6s and plywood. Plenty solid, but it's not going anywhere. Any suggestions for a lightweight frame material to make a portable riser? Something like steeling shelving material or similar off the shelf components. Still use plywood for the top.

Tony Wright

Stillwater, OK

Built for comfort, not for speed.
Jul 17th, 2015 10:07 AM   Edit   Profile   Print Topic   Search Topic

Reduce the size to four "risers" and use ratchet straps to hold them in place at gigs. Easier for two guys to move thru doors at venues and such. Also easier to load into the transport van or trailer.

We used 2x6 framing for our outdoor stage for 10 years or more. 4x4 posts or legs and 3/4 inch plywood. Each section was a full 48"x96". But for center bracing we used two 48: long 2x4 on 32" centers. That was for a full size 32ft x 24ft outdoor stage with a full 4ftx4ft drum riser. I always thought that for a smaller riser, smaller panels held together with four ratchet straps from side to side and front to back.

There are quality pro level risers that are light weight.

The thing I was "told" (but have no personal experience in this area so ask your local pro that you trust) is that the strength in most "steel studs" is the wall panel on the front AND the back...so to achieve that would require a wooden back as well as a wooden surface????

I would think that IF that were the case, you might be losing any weight advantage...

I would certainly plan on at least use 1/2 on the bottom and 5/8 or 3/4 on top.

Peegoo
Contributing Member
**********
**********
****

C-C-R is one letter

better than B-B-Q. Tastier too!
Jul 18th, 2015 09:20 AM   Edit   Profile   Print Topic   Search Topic

Tony, the reason for panels on both sides of the metal stud is, by themselves, they have no torsional rigidity...meaning, they're easily twisted like a corkscrew.

Once they twist even a little, their already moderate load-bearing properties are drastically reduced.

A 2x4, on the other hand, is fairly rigid and doesn't need additional help to stay straight under load.

I built a portable riser years ago that consisted of four boxes, each 48" square and 12" high.

I used 3/4" ply (two 4' x 8' sheets, each cut in half) for the top surfaces and four 48" sections of 2" x 12" for the sides of each box. I assembled 'em with plenty of glue and 3" deck screws, and cut handle slots in each side face of each box to make them a cinch for two people to pick up and move around.

A large ratchet strap held the four sections together. Unroll an 8' x 8' piece of carpet on top and you're off to the races.

Laker

Forgive your enemies

but never forget their names
Mar 24th, 2016 12:22 PM   Edit   Profile   Print Topic   Search Topic

Check this system out.

portable riser

Szymon507

Polska

Aug 23rd, 2016 11:04 PM   Edit   Profile   Print Topic   Search Topic

Good job.

FDP Forum / I'd Hit It! - Drums and Percussion / DIY drum riser?




Reply to this Topic
Display my email address             Lost your password?
Your Message:
Link Address (URL):
Link Title:




Moderators: Chris Greene  Iron Man  reverendrob  

FDP, LLC Privacy Policy: Your real name, username, and email
are held in confidence and not disclosed to any third parties, sold, or
used for anything other than FDP Forum registration unless you specifically authorize disclosure.

Furtkamp.com 
Internet Application Development

Copyright © 1999-2017 Fender Discussion Page, LLC   All Rights Reserved